THE EVERYTHING SCRUBBER™ is designed to bring three everyday cleaning functions into one adjustable tool. Its bristles loosen residue, the flat edge helps move water from suitable smooth surfaces, and the removable collector helps lift gathered hair and debris away from the head. Here is how to use each part with more control.
1. Set the handle for the task
Use a shorter setup when you need close control around bath edges, taps or small floor areas. Extend the handle for shower walls, floors and other areas that are awkward to reach. Before cleaning, make sure each connection is fully secured and the head feels stable.
2. Start dry when hair or dust is present
Loose hair is easier to collect before the surface is soaked. Sweep it into a small area, then use the removable collector to lift the gathered material away from the bristles. Empty the collector carefully and refit it before continuing.
3. Use the bristle side for scrubbing
Wet the surface and apply only a cleaner approved for that material. Work in short, overlapping passes. Let the bristles do the work instead of applying excessive pressure. On grout and corners, change direction to reach both sides of the line.
4. Use the flat edge as a finishing step
On suitable smooth wet surfaces, guide the flat edge toward the drain or an area where the water can be collected. Keep the edge in contact with the surface and use even strokes. It is a finishing tool, so remove heavier residue with the bristles first.
Surface-by-surface tips
- Shower walls and screens: work from the top down and rinse each section before residue dries again.
- Baths: shorten the handle for the rim, then extend it for the far side and base if that gives you better control.
- Floors: clear loose debris first, scrub toward the exit and avoid leaving standing water.
- Grout and corners: use controlled passes along the line and rinse away loosened residue as you progress.
Always test delicate finishes
Surface care instructions take priority. Test on a small hidden area before using the scrubber on delicate, coated, polished or easily scratched surfaces. Do not use a cleaner that is unsuitable for the material, and never mix cleaning chemicals.
Rinse, dry and store
After use, remove trapped debris, rinse the head and collector with clean water, and allow every part to dry in a ventilated place. Collapse the handle for storage only after the head is clean and dry, and keep weight off the bristles.
See THE EVERYTHING SCRUBBER™ and choose the setup that fits your cleaning routine. Purchases are covered by AVORIA’s 60-day guarantee; refer to the return policy for the complete terms.